Leopard Workshop : LW041 - 1.35 scale Leopard 1 and 2 Broadband Aerials

LW041 - 1:35 scale Leopard 1 and 2 Broadband Aerials

Designed to fit any appropriate Leopard 1 or 2
Small conical mount with spring base and thin constant radius mast. Used by (for example):

Leopard 1 from Norway

Parts list:

2 x real 3 mm springs
2 x brass fittings
2 x nickel silver wire masts (stronger than brass)
2 x resin aerial mounts

Tips

Drill a 0.5 mm hole (about 2 mm deep) centrally through the given hole in the base unit to take the brass fitting after sliding on the spring. The top of the brass fitting has a 0.35 mm hole to take the wire aerial. The wire supplied is the approximate length. Trim to the correct length using the drawing (47.8 mm from the top of the fitting).

Photos from David Alvarez, Michael Shackleton

Spanish Leopard 2E

Norwegian Leopard 1A5NO

purchase at MBK