Please note that all kits and conversions listed here are in 1:35 scale.
This page was last updated on
Wednesday, 27-Mar-2024 19:06:03 MST .
AFV Club 35S09
injection molded plastic workable Diehl 570 FT track links
a re-box of Elite 35H03 which is a re-box of HKCW TL3502
read the Leopard Club review
Armour Track Models TK-09
injection molded plastic workable Diehl 570 FT tracks
includes resin sprocket and idler wheels
out of production
Bronco AB3528
injection molded plastic workable Diehl 570 FT track links
a new tool item and not a re-box of an existing product
very nicely done, with two piece track shoes and an innovative design for the pins and end connectors
read the
Leopard Club Review
Easy Link EML-35-004
cast metal individual links representing Diehl 570 FT tracks
the set requires no wire to join the links
Elite 35H03
injection molded plastic workable Diehl 570 FT tracks
a re-box of HKCW TL3502
read the Leopard Club review
out of production
HKCW TL3502
Leopard Workshop LW031
Danish Leopard 2A5DK Diehl 570PO Tracks and Sprockets
a cast resin set consisting of two complete drive sprockets and a combination of individual track links
(a mix of both angled and straight aligned end connectors) and lengths of track
3D CAD mastered - a must have for any 2A5DK build
available for sale in the Leopard Club Shop
Perfect Scale Modellbau
A1027
3D printed tracks representing Diehl 570F tracks exhibiting complete wear of the track pads (as seen on Leopards in Afghanistan)
consists of several sections for each track run, curves in place to fit around the drive sprocket and idler
purported to be compatible with any Leopard 2 kit
Perfect Scale Modellbau
A1029
3D printed tracks representing Diehl 570F as used on pretty much any Leopard 2
consists of several sections for each track run, curves in place to fit around the drive sprocket and idler
purported to be compatible with any Leopard 2 kit
Rye Field Model
RM-2022
3D printed workable track links
includes pre-cut brass track pins and separate end connectors
the set includes 20 track links without the rubber blocks installed and separate worn blocks
Rye Field Model
RM-5057
workable track links (injection molded)
includes 12 track blocks with ice cleats (instead of rubber blocks)
the set includes a handy assembly jig
Sector 35 SEC3502
Leopard 2 metal tracks (Diehl 570 FT)
white-metal individual link tracks, includes wire to connect the individual links
end connectors are attached to one side of each track link
set looks identical in concept to Fruil track sets
Spade Ace SAT-35182
white metal individual link tracks
this more simplified version has the end connectors molded integral to the track block, but
with separate guide horns
the track links are joined with included wire (same assembly as Fruil track sets)
Spade Ace has a very simple website
without much in the way of content, but a simple photo of this track set
may be found here
Spade Ace SAT-35182S
white metal individual link tracks
a much more complex set, with separate parts for the track blocks, each end connector, the guide
horn and the centre connector
the track links are joined with included wire (same assembly as Fruil track sets)
Spade Ace has a very simple website
without much in the way of content, but a simple photo of this track set
may be found here
a photo of the contents of this track set
may be found here courtesy of Hobby Easy
T-Rex Studios 85033
3D printed workable track links
the assembly looks a little tricky but the level of detail on this set looks absolutely exquisite
a review will be forthcoming (when the set I ordered arrives)
Trumpeter 02039
injection molded plastic workable Diehl 570 FT tracks
labeled as Diehl 570P tracks - this is misleading as the set actually depicts the 570 FT tracks
(thank you Thomas Antonsen for pointing this out)
appears to be a re-cast of Armour Track Models TK-09
read the Leopard Club review