contains 16 smoke dishcargers and etch retaining chains (LW027B),
Eduard etch frets for the turret top ECM boxes and the C8 carbine box, cast resin cooler and
jerry cans, a printed sheet of ration boxes
the kit depicts a vehicle in Canadian service in Afghanistan - the 2A4M-CAN was deployed to
Afghanistan in 2010 on the last battle-group roto prior to the transition of Canada's role with
ISAF from combat to training
the set is designed for use with the Hobby Boss 2A4 kit
the set consists of 89 resin parts, 2 sheets of PE (slat armour and common parts) and braided
copper wire for use as towing cables
an in-depth review of the conversion set (including loads of photos) by Anthony Sewards may be found
posted at Armorama
Update set - consists of resin and photo etch parts
contains a replacement rear grill with the correct number of slats
an extensive update set which should enable one to produce a very accurate finished model
Y-Modelle Y35-119 - OOP
a multi-media conversion (cast resin, photo-etch) intended for use with the Hobby Boss 2A4
depicts a 2A4M-CAN with the KMW up-armour and other modifications ... but without Barracuda MCS fitted
a very thorough review of the conversion set [by Jason Bobrowich] may be found
posted here at Armorama
Leopard 2A6M-CAN
Black Dog T35039
resin conversion set designed for use with the Hobby Boss 2A6M-CAN kits
includes a new turret and upper hull (with Barracuda MCS fitted), filled
turret bustle bins, Barracuda umbrella, main gun, C6 GPMG with spade grips
and many other parts
from product photos on the Black Dog website, it appears that the C8 bin
(in front of the commander's position) may be displayed open with stowed
C8s in place
turret front and hull front have realistically worn MCS (cam net worn off
due to crew activity)
photos of the conversion set are available courtesy of Black Dog:
resin conversion set designed for use with the Hobby Boss 2A6M-CAN kit
includes new upper hull and turret (with Barracuda MCS fitted), rear hull plate,
C6 GPMG with spade grips, C8 turret stowage bin (which may be displayed open),
120mm ammunition (3 x MP-HEAT, 3 x APFSDS and 3 x cannister), C8 carbines x2,
Barracuda umbrella, main gun, and many other parts
Cromwell does not have a website but an extremely thorough review by Jason Bobrowich may be found
posted on Armorama
Eduard
36019 - Leopard 2A6M CDN slat armour (Tamiya)
slat armour for the Leopard 2A6M-CAN
designed to be used with the Tamiya 2A6
for more information, please refer to Jason Bobrowich's
in box review
courtesy of Armorama
a multi-media set consisting of cast resin, photo-etch, turned brass, metal springs and styrene rod (round and hex)
this set depicts the latest version of the 2A6M CAN (as of July 2017) and is not to be confused with conversions
for the vehicle as it appeared while deployed in Afghanistan from 2007-2011
the set contains resin and photo-etch parts and some printed items
the photo-etch parts include many detail upgrades for the Leopard 2A6 in addition to
Canadian modifications (which would include the C8 box and the ECM cases and antennae)
the set also includes clear water bottles, a cooler (ubiquitous on Canadian tanks in the sand-box)
and printed ration and water boxes
the set depicts a common field modification to the hull slat sections which were cut off almost
level with the bottom of the side skirts (to avoid damage)
this set may be used in conjunction with any of the Barracuda Cam conversions listed above
Canadian Leopard 2A6M, current version (circa 2016)
this conversion set may be used to depict the 2A6M-CAN operated by the LdSH (RC)
named Southern
(although it does include additional parts not fitted to Southern in 2016 such as the thermal cameras)
the set includes cast resin, photo-etch frets and printed ration boxes and Tim Horton's coffee tin labels
a multi-media set consisting of cast resin, photo-etch and printed paper (ration and drink boxes)
the PE fret includes the commander's C8 stowage box, ECM boxes smoke discharger chains
the box photos include a 2A4M-CAN but the contents of this set seem much better suited to
a 2A6M-CAN as deployed in Afghanistan (ECM boxes are not mounted on vehicles stationed in Canada)
this set was developed with extensive assistance from Thomas Antonsen (the man who literally
wrote the book on the 2A5DK)
the conversion set consists of cast resin, photo-etch parts and two small sheets of
water-slide decals (it's a really nice touch to include markings)
the conversion includes all the bits and pieces necessary to accurately represent a Danish
version of the 2A5
included in the set are all external tools with clamps ... this is important because the
Danish tool clamps differ from the stock German clamps
another nice bonus is the inclusion of a C8 carbine storage bin ... this is bolted to the
turret top between the commander's position and the main gun sight housing
a cast resin conversion designed for use with the Meng 2A4 kit
the set contains a new turret top and sides, side skirts, turret bustle bins, aerial mounts, turret grab rails
and other bits required to represent a Leopard 2A4 in service of Finland
Parts are included in the Italeri/Revell 2A5 and 2A6 kits for Dutch Leopards.
These parts would include the Netherlands style smoke discharger arrays and an FN-MAG
(although only the incorrect MG-3 is included in each kit).